|
         
|
Frequently Asked Questions
Below are the questions our customers most often ask. If you have a question that is not addressed here, please email us at info@newagaindeck.com or call us at 952-934-4465, and we will help you.
What type of wood can New Again Deck Renewal restore?
We restore all wood types, including pressure-treated pine, cedar, redwood, oak and mahogany.
What products will you use to clean and stain my deck?
It depends on your project. However, in general, we use either sodium percarbonate or oxalic acid to loosen the existing stain. Then we use a power washer to gently remove the stain. We then apply sodium hydroxide to neutralize, brighten and restore the pH balance of the wood, helping it resist mold. The wood is left to dry to a moisture content of 12 percent or less (we have a moisture meter to electronically gauge the moisture in the wood). Drying can take one to several days, depending on the weather. If needed, we lightly sand any seats or handrails. Lastly, we stain/seal the wood by hand with a penetrating, enduring oil-based stain/sealer in cedar, redwood or honey. This stain/sealer protects your wood from the sun, water and algae. To see the colors and read more about the TWP Total Wood Protectant stains we use, visit woodsealants.com and click on "TWP 100 Series."
How often will our deck need to be re-cleaned, stained and sealed?
Every two to four years, depending on the type of wood, its exposure to the elements, and the amount of traffic.
Is cleaning and sealing a deck really necessary?
Yes. Over time, weather, sun, pollen, mold and other factors cause the natural resins in all types of wood to break down. If the wood is not protected from these elements, the breakdown process will accelerate and you will have to replace your deck sooner
 After - Before
Will you be able to remove all the existing stain on my deck before you re-stain/seal it?
Most of the stain will be removed, but occasionally we have to stop short of removing every last trace. This is because, in some cases, the high pressure we would have to use to remove all the stain would damage the wood.
Will you clean and stain the underside of my deck, too?
The estimate does not include the underside; however, we will be happy to clean and stain the underside for a minimal charge.
I have a brand-new deck. Do I need to wait to stain it?
Some people believe that wood has to “age” before it can be sealed, but this isn’t true. The day that you finish installing your deck or other wood structure is the day you need to protect it from premature aging and expensive repairs. Proper cleaning of the wood before staining will ensure that it is able to absorb the wood sealer.
I have pressure-treated wood. Do I still have to stain it?
Some people believe that pressure-treated wood is weatherproofed, but it isn’t. Pressure-treated wood has been injected with a chemical that protects it against rot and wood-eating insects such as termites. But this process does nothing to protect the surface of the wood against weather. In fact, pressure treatment actually makes the wood even more porous and vulnerable.
| |
| |
|
New Again Deck Renewal
PO Box 44277
Eden Prairie, MN 55344
ph: 952-934-4465
info@newagaindeck.com
Copyright 2009 © New Again Deck Renewal, Inc. All rights reserved.
| |
|
